Skip to Primary Navigation Skip to Site Navigation Skip to Main Content All 3M.com Site Map

Paint Rectification

3M™ 401Q P2500 Scalloped Discs (67832)

Small Defects: Step 1 (hand or machine options)

By Hand: Remove defect using 3M™ 401Q P2500 Scalloped Discs (67832).

OR

3M™ 260L Hookit Finishing Film Disc 75mm P1500 (00907)

By Machine: using 3M™ 260L Hookit Finishing Film Disc 75mm P1500 (00907).

OR

Perfect-it™ Denibbing System (50666)

By Machine: using 3M™ Perfect-it™ Denibbing System (50666).

 
3M™ Trizact™ Fine Finishing Abrasive Discs

Small Defects: Step 2

Use 3M™ Trizact™ Fine Finishing Abrasive Discs P3000 76mm (50415) over the area to speed up polishing time.

 
Excess defects are removed by using 3M™ 260L Fine Finishing Discs

Large Defects: Step 1

Excess defects are removed by using 3M™ 260L Fine Finishing Discs P1200/1500 (81734/63962). Use with 3M™ Hookit™ Soft Interface Pad (05774).

 
3M™ Trizact™ Microfinishing Discs P3000 150mm (50414) on a dampened panel to refine the sanding scratches

Large Defects: Step 2

Use 3M™ Trizact™ Microfinishing Discs P3000 150mm (50414) on a dampened panel to refine the sanding scratches. This will reduce risk of rework due to finish ’dropping back’.

 

For more information or to discuss your specific requirements Contact Us